Product ID:YELLOW PROTOPET 2A PETROLATUM USP
MSDS Date:04/16/1990
FSC:9150
NIIN:01-165-9347
MSDS Number: BMZLL

Emergency Phone: 412-756-2210;800-424-9300(CHEMTREC)

Info Phone: 412-756-2210 OR 212-605-3911

Preparer: ALEXANDER COUTRAS

Cage: 5H954

Telephone: 713-975-5858

Cage: 5H954

GREASE, PETROLEUM

CAS: 8009-03-8

OSHA PEL 5 MG/M3 (OIL MIST)

ACGIH TLV: 5 MG/M3 (OIL MIST)

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:NONE SPECIFIED BY MANUFACTURER.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:NONE SPECIFIED BY MANUFACTURER.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:FOR MOLTEN PETROLATUM ONLY. EYES:FLUSH IMMEDIATELY W/COLD
WATER FOR AT LEAST 15 MINS. CALL MD. SKIN:FLUSH IMMEDIATELY W/COLD
WATER. CALL MD. INHAL:REMOVE TO FRESH AIR. SUPPORT BREATHING (GIVE
O*2/ARTI FICIAL RESPIRATION) . INGEST:CALLMD IMMEDIATELY.

Flash Point Method:COC
Flash Point:>390F,>199C
Extinguishing Media:DRY CHEMICAL, CO*2, FOAM, WATER FOG, SAND & EARTH.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT . WATER SPRAY IS AN UNSUITABLE EXTINGUISHING
AGENT.
Unusual Fire/Explosion Hazard:NONE.

Spill Release Procedures:SHUT OFF LEAK & DIKE UP LARGE SPILLS. AFTER
COOLING & SOLIDIFICATION, SCRAPE &/OR SHOVEL UP MATERIAL. FINALLY,
CLEAN AREA W/AN OIL ABSORBENT MATERIAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE AWAY FROM FLAME, HEAT (200F
MAXIMUM) & STRONG OXIDIZING AGENTS.
Other Precautions:IF USED IN APPLICATIONS WHERE A MIST MAY BE
GENERATED, OBSERVE A TWA/PEL OF 5 MG/M3 OF MINERAL OIL MIST (OSHA &
ACGIH).

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE
FOR EXPOSURE OF CONCERN .
Ventilation:NONE SPECIFIED BY MANUFACTURER.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:CHEM WORK GOGGS/FULL LENGTH FSHLD
Other Protective Equipment:WHEN MOLTEN, WEAR COVERALLS.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Melt/Freeze Pt:M.P/F.P Text:>100F,>38C
Spec Gravity:0.815-0.880@60C
Solubility in Water:NIL
Appearance and Odor:OPAQUE, YELLOW SEMI-SOLID; NO ODOR.

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:FLAME AND HEAT (200F MAXIMUM).
Hazardous Decomposition Products:UPON COMBUSION, CO & CO*2 ARE
GENERATED.

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE &
FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.